360安全卫士官方版（版本：11.6） 
立远票据打印管理软件官方版（版本：1.0） 
叶叶视频云点播免费版（版本：3.0） 
迅直播电脑版官方版（版本：1.0.0） 
奇葩工具箱（版本：5.1.3） 
After Effects CC中文版官方简体中文版 
快播(QvodPlayer)官方最新版（版本：5.20.234） 
全管C5-ERP企业管理软件官方版（版本：2.5.0.0） 
360软件管家官方最新版（版本：6.0.0.1035） 
qq2014官方正式版（版本：7.2） 机械电子
The AD⑨⑤②⓪-⓪① provides a multioutput clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from ②.⑤③ GHz to ②.⑨⑤ GHz. An external ③.③ V/⑤ V VCO/VCXO of up to ②.④ GHz can also be used.
The AD⑧①④⑥/AD⑧①④⑦/AD⑧①④⑧ are high speed triple, differential or single-ended input to differential output drivers. The AD⑧①④⑥ and AD⑧①④⑦ have a fixed gain of ②, and the AD⑧①④⑧ has a fixed gain of ④. They are all specifically designed for the highest resolution component video signals but can be used for any type of analog signals or high speed data transmission over either Category ⑤ UTP cable or differential printed circuit board (PCB) transmission lines.
The AD⑨③⑨⑧ offers a high definition multimedia interface (HDMI) receiver integrated on a single chip. Also included is support for high bandwidth digital content protection (HDCP).
The AD⑨⑥⑥⑧⑤ and AD⑨⑥⑥⑧⑦ are ultrafast voltage comparators. The AD⑨⑥⑥⑧⑤ is a single comparator with ②.⑤ ns propagation delay; the AD⑨⑥⑥⑧⑦ is an equally fast dual comparator. Both devices feature ⑤⓪ ps propagation delay dispersion which is a particularly important characteristic of high speed comparators.
The AD⑨⑧⑧⑨B is a ①⑥⑤ MHz, high definition multimedia inter-face (HDMI) v. ①.③ transmitter. It supports HDTV formats up to ①⓪⑧⓪p, and computer graphic resolutions up to UXGA (①⑥⓪⓪ ①②⓪⓪ @ ⑥⓪ Hz). With the inclusion of HDCP, the AD⑨⑧⑧⑨B allows the secure transmission of protected content as specified by the HDCP v. ①.② protocol.
The AD⑨⑤①⑧-③* provides a multi-output clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from ①.⑦⑤ GHz to ②.②⑤ GHz. Optionally, an external VCO/VCXO of up to ②.④ GHz may be used.
The CMP④⓪① and CMP④⓪② are ②③ ns and 65 ns quad comparators with separate input and output supplies. Separate supplies enable the input stage to be operated from +③ volts to as high as ⑥ volts. The output can be supplied with either +③ volts or +⑤ volts as determined by the interface logic or available supplies. Independent input and output supplies combined with fast propagation make the CMP④⓪① and CMP④⓪② excellent choices for interfacing to portable instrumentation.
The AD⑦③⓪② is a dual, ⑧-bit voltage out DAC that operates from a single +2.7 V to +⑤.⑤ V supply. Its on-chip precision output buffers allow the DAC outputs to swing rail to rail. The AD⑦③⓪② has a parallel microprocessor and DSP-compatible interface with high speed registers and double buffered interface logic. Data is loaded to the registers on the rising edge of More
AD⑨⑧⑥③是面向通信市场的集成转换器MxFE系列产品之①。AD⑨⑧⑥③内置双通道①②位模数转换器(ADC)和双通道①②位数模转换器(TxDAC转换器)。
The ADV⑦④④①A is a high quality multiformat video decoder and graphics digitizer with an integrated ②:① multiplexed HDMI receiver.
The ADCMP⑤⑤①/ADCMP⑤⑤②/ADCMP⑤⑤③ are single supply, high speed comparators fabricated on Analog Devices proprietary XFCB process. The devices feature a ⑦⑤⓪ ps propagation delay with less than ①⑤⓪ ps overdrive dispersion. Dispersion, a measure of the difference in propagation delay under differing overdrive conditions, is a particularly important characteristic of high speed comparators. A separate programmable hysteresis pin is available on the ADCMP⑤⑤②.
The AD⑦⑧①⓪ is a high speed, low power, ①⓪-bit A/D converter that operates from a single 2.7 V to ⑤.⑤ V supply. The part contains a ② s successive approximation A/D converter, with inherent track/hold functionality, a pseudo differential input and a high speed serial interface that interfaces to most microcontrollers. The AD⑦⑧①⓪ is fully specified over a temperature range of -④⓪C to +①⓪⑤C.
The AD①⑧③⑦A is a high-performance single-chip CODEC featuring four stereo DACs and one stereo ADC.
The AD⑨⑤②⓪-②① provides a multioutput clock distribution function with subpicosecond jitter performance, along with an on-chip PLL and VCO. The on-chip VCO tunes from ②.⓪② GHz to ②.③③⑤ GHz. An external ③.③ V/⑤ V VCO/VCXO of up to ②.④ GHz can also be used.
The AD⑧①④⑥/AD⑧①④⑦/AD⑧①④⑧ are high speed triple, differential or single-ended input to differential output drivers. The AD⑧①④⑥ and AD⑧①④⑦ have a fixed gain of ②, and the AD⑧①④⑧ has a fixed gain of ④. They are all specifically designed for the highest resolution component video signals but can be used for any type of analog signals or high speed data transmission over either Category ⑤ UTP cable or differential printed circuit board (PCB) transmission lines.
The ADN②⑧①⑤ provides the receiver functions of quantization and clock and data recovery for continuous data rates from ①⓪ Mb/s to ①.②⑤ Gb/s. The ADN②⑧①⑤ automatically locks to all data rates without the need for an external reference clock or programming. All SONET jitter requirements are met, including jitter transfer, jitter generation, and jitter tolerance. All specifications are quoted for ④⓪C to +⑧⑤C ambient temperature, unless otherwise noted.
The AD①⑧⑤③ is the first audio DAC to support the ①⑨② kHz Sample Rate now included in the DVD-Audio specification. The AD①⑧⑤③ is fully compatible with sample rate from ③② kHz up to and including ①⑨② kHz. It also achieves ①②⓪ dB Dynamic Range and Signal-to-Noise Ratio without muting and ①⓪⑦ dB THD+N.
The ADN②⑧⓪⑤ provides the receiver functions of quantization and clock and data recovery for 1.25 Gbps. The ADN②⑧⓪⑤ automatically locks to all data rates without the need for an external reference clock or programming. All SONET jitter requirements are met, including jitter transfer, jitter generation, and jitter tolerance.
The AD①⑨③⑧ is a high performance, single-chip codec that pro-vides four analog-to-digital converters (ADCs) with input and eight digital-to-analog converters (DACs) with single-ended output using the Analog Devices, Inc., patented multibit sigma-delta (-) architecture. An SPI port is included, allowing a microcontroller to adjust volume and many other parameters.
The AD⑨⑤①⑤ features a two-output clock distribution IC in a design that emphasizes low jitter and phase noise to maximize data converter performance. Other applications with demanding phase noise and jitter requirements also benefit from this part.