推荐理由：《beeCam Light Meter》是一款适用于安卓系统的系统类软件APP。The application program is started. (②)《beeCam Light Meter》大小153.73KB，在本站深受7830位玩家喜爱和下载。要找等，赶紧下载到手机吧。
From the screen, tap the \START\ button.(③)
Smartphone put in front of the subject.
(Please toward for the camera side where the illuminance
sensor is used to take a picture. )(④)
Tap the \STOP\ button.(⑤)
When the ISO sensitivity is set, tap the \ISO\ button .
The ISO setting screen is displayed.
Please select the ISO sensitivity. (⑥)
[For aperture priority]
To calculate the shutter speed, tap the \F\ button.
A set screen of F value is displayed. Please select F value.
[For shutter speed priority]
To calculate F value, the \T\ button is pushed.
A set screen of the shutter speed is displayed.
Please select the shutter speed. (⑦)
From the screen, getThe ISO, F value and the shutter speed, and set in the camera.Remarks･The illuminance sensor is installed on the liquid crystal screen side of the terminal. ･In the terminal that cannot use the illuminance sensor, the \INPUT\ button is displayed instead of the \START\ button.
Tap the \INPUT\ button, the illuminance setting screen is displayed.
Please specify the illuminance corresponding to the situation.
The ISO, F value and the shutter speed are calculated by the specified illuminance. ･When click the menu key to the termina, the menu is displayed under the screen.
In \Setting\ menu, it is possible to set it as follows.
Select light values:
Select useing sensor or manual input.
Sensor correction:
Input the correction value of the illuminance sensor.
Steps:
Select same the steps as the camera used to take a picture. ･The light sensor may not get the terminal does not change the brightness and intensity. In that case, please read after covering with the hand and darkening the sensor once and apply light. ･The light sensors may take some time to get light.
