推荐理由:《LectroRM》是一款适用于苹果系统的生活类软件APP。Remote control for Lectrosonics® SM and LM transmitters. This remote functions by playing an encoded audio tone into the microphone attached to the transmitter..《LectroRM》大小2.99 MB,在本站深受4961位玩家喜爱和下载。要找等,赶紧下载到手机吧。
Controllable Settings: (*Some or all of the settings may not be supported by your particular transmitter)
- *Audio Level
- *Frequency
- Sleep Mode
- Lock Mode
- *Power Output
- *Low Cut Filter
- *LED On/Off
Features
- Simplistic design for fast and easy use
- Sounds are generated dynamically, not loaded from memory
- Volume control on each page for easy access
*Not all remote control tones are supported by every Lectronsonics device.
Lectrosonics® SM transmitters must be configured to accept remote control tones. Hold down arrow while turning on the transmitter. Then select rc on. The original SM requires firmware version ①.⑤ (released ①②/⓪⑤) to respond to the remote. The firmware version number appears upon turning on the unit. Any tones properly received but not supported will be met with --------- response on the transmitter screen.
Lectrosonics® is a registered trademark of Lectrosonics Inc. Lectrosonics Inc. does not provide support for this app.