推荐理由：《MID WiFi》是一款适用于苹果系统的交通类软件APP。This is an evaluation version of MID WiFi.《MID WiFi》大小2.0MB，在本站深受7305位玩家喜爱和下载。要找等，赶紧下载到手机吧。
Use your iPhone/iPad as an advanced marine instrument display. MID WiFi shows the information from the navigation system, the angle of heel and the predicted boat speed. The data (NMEA⓪①⑧③) is received over the WiFi and/or from the internal compass and GPS.
Search for \Marine Instrument Display\ as well.
FEATURES
- Compass Heading (mag/true) (HDG)
* Course Over Ground (COG)
* Speed Over Ground (SOG)
* Average SOG (ASOG)
* Maximum SOG (MSOG)
* Trip Distance (TRIP)
* Trip Time (TIME)
- Countdown Timer (CDT)
- Distance to Line (DTL)
- Time to Line (TTL)
- Heeling (HLG)
* Position
** Apparent Wind Angle and Speed (AWA, AWS)
** True Wind Angle and Speed (TWA, TWS)
** Maximum True and Apparent Wind Speed (MAWS, MTWS)
** True Wind Direction (TWD)
** Velocity Made Good to Wind (VMGwnd)
** Velocity Made Good to Waypoint (VMGwpt)
** Boat Speed (SPD)
** Maximum Boat Speed (MSPD)
** Depth (DPT)
** Air and Sea Temperatures (AIR, SEA)
** Barometric Pressure (BPR)
** Bearing to Waypoint (BTW)
** Distance to Waypoint (DTW)
** Time to Waypoint (TTG)
** Cross Track Error (XTE)
** Predicted Boat Speed (PSPD)
** Boat Speed to Predicted Boat Speed Ratio (SPR)
** Revolutions Per Minute (Engine/Shaft) (RPM)
** Propeller Pitch (PRP)
** NoLand Eng. Analog Values (EAV①-⑤)
** TackTick FFP①-④
* = Internal GPS or NMEA-WiFi bridge required
** = NMEA-WiFi bridge required (e.g. Simrad GoFree WIFI-①, RS②③②-WiFi, Digital Yacht iAIS/WLN①⓪, ShipModul MiniPlex-②Wi, iMux, Ockam LANbridge)
WIND VIEW
- Shows Apparent and True Wind Angles simultaneously
- The size of the blue sector indicates the variation of the wind direction
MAP VIEW
- AIS targets (**
- View and store the tracks
- Share the tracks by email (GPX)
ALARMS
- Depth (Deep, Shallow)
- Anchor (Deep, Shallow, Distance)
- Wind (AWA/TWA/AWS/TWS High/Low, TWD Shift)
- Three pages with different font sizes
- Three color modes for day and night (black/white, white/black, red/black)
- Supported units kt / nm, mph / mi, km/h / km, m / ft, °C / °F
HOW TO USE
- Tap the SET to enter the Settings page
- Tap the value of any field to cycle through the color modes
- Tap the title of any field (such as TIME) to select the data to the field
- Tap the unit (°) of the heeling (HLG) to calibrate (zero angle)
- Press the value of any field at least two seconds to reset the TIME, ASOG, MSOG and TRIP
- Swipe to switch between data pages
- Rename the track by tapping the name of it
- Tap the LOCK to lock/unlock the screen (orientation and other functionality except scrolling and TIME/ASOG/MSOG/TRIP reset)
- Use IP address ②⑤⑤.②⑤⑤.②⑤⑤.②⑤⑤ for the UDP broadcast/multicast. The port for the Simrad GoFree discovery is ②⓪⑤⓪ or ②⓪⑤②, ⑤⓪⓪⓪-⑤⓪①⓪ are for Ockam LANbridge and ⑤⑤⑤⑤④ for SailTimer Wind Vane.
- The location services are switched on by default. They can be switched on/off by tapping the coordinates. It is suggested to switch off before you exit in order to conserve power. If the application is put in background it runs ③⓪ minutes before being suspended.
- The trip time runs while moving (SOG
- The COG is shown while moving (SOG
⓪) (internal GPS)
COUNTDOWN TIMER
- Configure the start time (① - ③⓪ minutes) by touching the SET to enter the Settings view
- Start/sync the timer by touching the \sync\
- Stop the timer by touching the \sync\ at least two seconds
- The timer beeps every minute and when ⑤⓪, ④⓪, ③⓪, ②⓪, ①⓪, ⑤, ④, ③, ②, ①, ⓪ second(s) are remaining
CALIBRATION
①. The back cover must be faced forward accurately in order to get the correct compass heading.
②. Mount the iPhone/iPad securely and make sure it cannot move accidentally to ANY direction.
③. Tap the unit field (°) of the heeling (HLG). HLG is set to zero and the heading shows the correct value.
Continued use of GPS running in the background can dramatically decrease battery life.
